Olympus OEP-3 - Page 41

1-35
OEP-3 V1 (UC)
68
Operation
C
of /ON
ATPION :
CAPTION OFF/ON
:
f
C
C
OF / on
ATPION :
CAPTION OFF/ON
:
F
SOURCE/
MEMORY
MEMORY
PAGE
CAPTURE
PRINT
PRINTALARM
POWER
Making printouts with a caption
Store a caption that you want to attach to the printout beforehand.
(See “Entering a Caption
” on page 62.)
1
Press the CAPTION ON/OFF button.
The current setting appears. The video monitor screen is reset to the regular
screen after a few seconds.
2
Select ON.
Press the CAPTION ON/OFF button repeatedly until the color of ON turns
green on the video monitor, or until ON is displayed in capital letters on the
printer window display.
Each time you press the CAPTION ON/OFF button, the setting changes in the
order ON c OFF c ON....
To make a printout without a caption
Select OFF.
3
Press the PRINT button.
The printout with a caption is made.
1,23
The currently selected setting is lit in green
The currently selected setting is
displayed in capital letters.
When the CAPTION ON/OFF
button is set to ON, C appears.
Switch ON to green.
Display ON in capital
letters.
Making Printouts With a Caption (Continued)
69
Operation
PRN SPEED : / HIGH
MOTION CHK
F
UNCT I ON :
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
: OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
: PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
S
INTERVAL
FUNCTION
PRESS
[
>
]
Deleting the Images Stored in Memory
You can delete images captured to memory pages, from either all of the memory
pages or a single memory page, by using the CLEAR button.
Whether the images of all memory pages or only a single memory page are deleted
depends on the setting of CLEAR in the FUNCTION SETUP menu.
Setting the Function of the CLEAR Button
1
Press the MENU button.
The previously selected menu appears.
2
Select PRN by pressing the G or g button.
The PRINTER SETUP menu appears.
3
Select FUNCTION by pressing the F or f button.
1
2,6
3,5,7
4
PRN SPEED : / HIGH
MOTION CHK
P
/c/ l /PRN/i/o/
RINTER SETUP
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
S
Switch PRN to green by pressing
the G or g button.
Display PRN in capital letters by
pressing the G or g button.
Position the cursor at FUNCTION
by pressing the F or f button.
Press the F or f button until
FUNCTION appears.
Continue to the next page c