Olympus OME-L200 - Page 30

26
3.4 Connection of cables
OME-L200 INSTRUCTION MANUAL
Ch.3
4 Hold the power cable so that the tab comes on the top and insert it into the power
supply terminal of this instrument all the way until it clicks.
Figure 3.8
5 Confirm that none of the cables are intersected. (See Figure 3.9)
6 Operate the spare lamp selector lever to confirm that it can be moved smoothly to
both ends.
Figure 3.9
Power cable
Power supply
terminal
Tab
Spare lamp
selector lever
Cables