8
Important Information — Please Read Before Use
VIDEO SYSTEM OTV-SI
• Do not touch the light guide plug of the endoscope
immediately after removing it from this instrument or the
output connector of this instrument because they are
extremely hot. Otherwise operator and/or patient injury can
result.
• Do not look directly into the distal end of the endoscope or
the output connector of this instrument while this instrument
is ON. The intense light may cause eye injury.
• This product may interfere with other medical electronic
equipment used in combination with it. Before use, fully
confirm the compatibility of this instrument and all equipment
to be used.
• Be sure to follow the instructions given in the instruction
manuals of the endoscope, electrosurgical unit and
electrosurgery-compatible endo-therapy accessory when
performing high frequency treatment. Otherwise, burns may
result due to abnormal current flow.
• The system should be establish with equipment complied
with relevant EMC standards for safety reason.
• Equipment which do not comply with EMC standard may
cause interference and its function or performance may be
affected.
• Portable or mobile phones may influence the medical
electrical equipment by their emitting energy.
• Do not use a pointed or hard object to press the switches on
the front panel of this instrument. This may break the
switches.
• Do not handle this instrument roughly, as this may result in
equipment damage or patient and operator injury.
• Be sure to observe the following points. Otherwise, a failure
in an electrical contact may result in malfunction.
Do not touch the electrical contacts in the video connector
socket of this instrument.
Do not apply excessive force to the connectors.
To Next Page
