Olympus OTV-SI - 5.3 Clock adjustment

Chapter 5 Operation
57
VIDEO SYSTEM OTV-SI
5.3 Clock adjustment
The date and time can be adjusted by navigating through the menu using the
remote control switches or the keyboard (optional).
 Setting date and time
1. If the video monitor does not display the menu, press the remote control
switch for execution or for selection, the “F1”, “Enter”, “  ”, “  ”, “” or “”
key on the keyboard to display the menu bar shown in Figure 5.6.
2. Press the remote control switch for selection, the “” or “” key on the
keyboard and select “NEXT” (see Figure 5.6).
Figure 5.6
VISY218