Olympus SH-2 - ISO Sensitivity; Sequential Shooting and Self-Timer

46 EN
ISO sensitivity Sets the ISO sensitivity.
l
ISO Auto
The camera automatically sets the sensitivity with priority
on image quality.
m
High ISO
Auto
The camera automatically sets the sensitivity with priority
on minimizing blur caused by a moving subject or by
camera shake.
S
to # Value
Set a smaller value to reduce noise in the picture, or a
larger value to reduce blur.
o/
Y
Sets the sequential shooting function and the time
from pressing the shutter button until the picture is
taken.
o
Single One frame is shot each time the shutter button is pressed.

Sequential 1
The images are taken sequentially for 200 frames at up
to about 2.5 frames per second (fps) while pressing down
the shutter button all the way down.

Sequential 2
The images are taken sequentially for up to 16 frames at
about 11.5 frames per second (fps) while pressing down
the shutter button all the way down.
c
High-Speed1
The images are taken sequentially for up to 60 frames at
about 20 frames per second (fps) while pressing down the
shutter button all the way down.
d
High-Speed2
The images are taken sequentially for up to 60 frames at
up to 60 frames per second (fps) while pressing down the
shutter button all the way down.
c
Y
12 sec
The self-timer lamp turns on for approx. 10 seconds,
then blinks for approx. 2 seconds, and then the picture is
taken.
d
Y
2 sec
The self-timer lamp blinks for approx. 2 seconds, then the
picture is taken.
YC
Custom Self-
timer
Photographs are taken at “timer second (the time from
pressing the shutter button until the picture is taken), the
number of frames, and the interval time” which you set.