44
3
Basic shooting functions
Recording movies
This function allows you to record movies.
1 Press the m button.
• The scene selection screen is displayed.
2 Press ON to select A, and press Z.
3 Compose your picture.
• The remaining recording time is
displayed on the monitor.
4 Press the shutter button fully to
start recording.
• The card access lamp blinks while the
movie is being saved.
• During movie recording, the A mark
lights red.
• You can use the zoom button to enlarge
your subject.
5 Press the shutter button again to
stop recording.
• When the remaining recording time has been used up, recording stops
automatically.
• When there is space in the internal memory or the card, the remaining
recording time (P. 26) is displayed, and the camera is ready to shoot.
Note
• If the distance to the subject greatly changes during recording, you may lose
focus.
•In n mode, the flash is not available.
00:36
To Next Page
Loading...
