Changing the startup screen (PW ON SETUP)
85
6
Settings
1 Select [OFF], [1] or [2], and press
Z.
OFF No picture is displayed.
1 A picture is displayed.
2 The picture registered with
[SCREEN SETUP] is displayed. If
there is no registered picture,
nothing is displayed.
2 Press Z.
You can select the picture that is displayed when the power is turned on. Still pictures
in the internal memory or the card can be registered. Use [PW ON SETUP] to display
the screen you registered. g“Changing the startup screen (PW ON SETUP)”
(P. 84)
Top menu [MODE MENU] [SETUP] [SCREEN SETUP]
g“Using the menus” (P. 17)
• If a picture is already registered, the [IMAGE
EXISTING] screen is displayed asking if you
want to cancel the currently registered picture
and register a new one. To register a new
picture, select [RESET], and press Z. If you
select [KEEP], the screen returns to the menu.
1 Select the picture you want to
register, and press Z.
2 Select [OK], and press Z.
• The picture is registered and the screen
returns to the menu.
Registering the startup screen (SCREEN SETUP)
RESET
PW ON SETUP
REC VIEW
2
1
OFF
SETUP
MEM CAM
RESET
KEEP
IMAGE EXISTING
SCREEN SETUP
SELECT
CANCEL
OK
GO
OK
CANCEL
SET AS PW ON SCREEN
OK
SCREEN SETUP
SELECT
CANCEL
GO
To Next Page
Loading...
