Olympus SZ3060 - Page 54

SZ-CHI
@
C. REPAIR PROCEDURE
(3)
Set
the jig.
@
Standard stand ..
SZ-ST
0
Transformer .....
TL2
CD
Eyepiece ........
G series
eyepiece
®
Mirror of ~20 or more
(4)
Light the halogen lamp of SZ-CHI.
(5)
Loosen the screws~ fixing the left
and right· polarizer@. ·
(6)
Adjust focus on the mirror surface.
(7) Turn the lefi side polarizer while
monitoring through the right side
eyepiece, and tighten t~e screw to
fix th~ .Polarizer at the position
where the view bec9mes most dark.
(8) Attach the quarter wave plate to
the SZ microscopebottom end,turn it
gradually while monitoring through
the right side eyepiece, and stop it
at the position where the view
becomes most dark.
(9) Turn the right side polarizer while
monitoring·through the left side
eyepiece, and tighten the screw to
fix the polarizer at the position
where .the view becomes most dark.
(10) Observe the mirror surface by view-
ing the left and right side eyepieces
simultaneously. Turn the quarter
wave plate and check if the cross
nicol and open nicol appear
simultaneously in the left and right
visual fields. If any defect
occurs, repeat the adjustment from
(8) •
C-3