Olympus U-LLGAD - User Manual

Questions and Answers:

A
andrewwarnerAug 9, 2025
What to do if the Olympus U-LLGAD lamp turns off during use?
- T
  Thomas HoffmanAug 9, 2025
  If the lamp turns off during use, it could be due to several reasons. First, the lamp life may have expired, in which case you should replace it with a new one. Another possibility is that the built-in fuse is blown, requiring a fuse replacement. Lastly, the light source may be overheating because of accumulated dirt or dust in the ventilation opening. If this happens, turn off the power, clean the ventilation opening, and allow the light source to cool down before turning the power back on.
D
Dawn CarterAug 15, 2025
Why the Olympus Laboratory Equipment power can not be turned on?
- L
  Lisa WilliamsAug 15, 2025
  If the power of your Olympus Laboratory Equipment cannot be turned on, there are a couple of things to check. First, make sure that the power cord and plug are correctly connected. If they are not, connect them properly. If the power cord is correctly connected, the built-in fuse may be blown. In this case, replace the fuse with a new one.
E
Ernest StoneAug 20, 2025
What to do if the Olympus U-LLGAD lamp cannot be turned on?
- M
  Matthew YoungAug 20, 2025
  If the lamp of your Olympus Laboratory Equipment cannot be turned on but the cooling fan is operating, consider these possible causes: * The lamp life might be expired. Replace it with a new lamp. * The lamp might not be mounted properly. Ensure the lamp is correctly mounted. * The ventilation openings on the bottom and side of the light source could be blocked. Remove any objects blocking these openings and ensure sufficient space around them.
H
Haley WilliamsAug 27, 2025
Why is the Olympus Laboratory Equipment lamp dark even though it can be turned on?
- J
  Jacqueline HooverAug 27, 2025
  If the Olympus Laboratory Equipment lamp can be turned on but appears dark, there are several potential reasons. The lamp life may have expired, requiring a replacement. Alternatively, the lamp or the light guide might not be mounted properly; ensure both are correctly mounted. Also, check the light volume adjustment dial; if the dial value is low, slowly rotate it towards 100, level by level.
D
Denise WilliamsSep 1, 2025
How to fix an unstable Olympus U-LLGAD lamp?
- X
  xramirezSep 1, 2025
  If the Olympus Laboratory Equipment lamp can be turned on but is unstable, the most likely cause is that the lamp life has expired. You should replace it with a new lamp.