Olympus UHI-3 - Cylinder Hose (PIN) for UHI-3 (MAJ-1080); Optional Components

Chapter 2 Instrument Nomenclature
21
HIGH FLOW INSUFFLATION UNIT UHI-3
2.4 Cylinder hose (PIN) for UHI-3 (MAJ-1080)
2.5 Optional components
 Foot switch (MH-317)
Use the supplied wrench to connect to
the CO
2
gas inlet on the rear panel of
the UHI-3.
Yoke
Hose
This yoke connects the
cylinder hose to the gas
cylinder.
Pin
Packing
Connector
Connect this connector
to the foot switch
connector on the rear
panel of the UHI-3.
Connecting cord
Pedal
Connector
When pressed: ON
(smoke evacuation)
When released: OFF