Do you have a question about the Olympus UHI-3 and is the answer not in the manual?
Brand | Olympus |
---|---|
Model | UHI-3 |
Category | Medical Equipment |
Language | English |
Identifies labels and symbols on the UHI-3 main unit.
Identifies labels and symbols on the cylinder hose (MAJ-1080).
Explains symbols found on the back cover of the instruction manual.
Defines the instrument's purpose and required operator expertise for safe use.
Details equipment compatibility and procedures for cleaning and storage.
Explains safety indicators and critical hazard information for safe operation.
Explains various symbols used in the manual and on the instrument.
Details the front panel components, indicators, and controls of the UHI-3.
Describes the connectors and ports located on the rear of the UHI-3 unit.
Provides step-by-step instructions for the initial setup of the UHI-3 main unit.
Guides on connecting the unit to AC power and CO2 gas sources.
Details connecting insufflation/suction tubes, filters, and foot switch.
Outlines procedures for checking the main unit's power and gas supply before use.
Details functional tests for insufflation, alarms, and tube obstruction warnings.
Covers inspection of hoses, tubes, adaptors, and the foot switch for damage.
Explains the process of performing insufflation with the veress needle.
Describes the operation of automatic suction and smoke evacuation features.
Outlines steps for safely disconnecting and powering down the unit after operation.
Advises on safe cleaning, sterilization, and handling of components to prevent contamination.
Provides detailed steps for cleaning and sterilizing insufflation and suction tubes.
Covers proper storage conditions for the unit and its accessories, and disposal procedures.
Lists common problems and solutions for the UHI-3 main unit and insufflation function.
Addresses troubleshooting for suction, various alarms, and insufficient gas supply.
Specifies the required temperature, humidity, and atmospheric pressure ranges for operation and storage.
Details electrical, physical, and functional specifications of the UHI-3 unit.
Provides specifications for essential accessories like foot switch, hoses, and tubes.