VISERA ELITE II Quick Reference Guide
Disclaimer: Information provided in this guide is not exhaustive. Please refer to the complete Instructions For Use for each
item of equipment which should be thoroughlyread and understoodprior to handling, use and storage of the equipment.
White BalancingWhite BalancingCamera Head
Once the camera head, telescope and light guide cable are
connected, a white balance must be performed.
Perform a white balance by surrounding the tip of the
telescope in a white swab, ensuring it is fully enclosed.
Press and hold the white balance button until ‘White
Balance Complete’ appears on the monitor.
The white balance status changes to completed.
Note: the optimal brightness for each user preset has
already been set so there is no need to make adjustments
to the levels.
Attach the camera head to the telescope by rotating the
endoscope mount as below.
Releasing the camera head mount secures the telescope
in place.
Rotate
lock ring
Eyepiece
Endoscope mount
To Next Page
Loading...
