7
···
'Press the STOP button to close the menu.
•.
If it is set to "On",
~
will appear on the display.
® VCVA
(Variable
Control
Voice
Actuator)
indicator
1201120
•
OOMOOS
1H27M53s
•
Standb
VCVA
Level
a 2
3:1:11
1211121
E!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!~~IF
ii"
ILl
~RI
©.....=========.
oPress the
REC
button to start recording.
o
When
the
sound
volume
is
lower
than
the
preset
..
threshold sound level, recording automatically stops after
1 sec approximately,
and
"Standby"
flashes on the
display. The record/play indicator light glows red when
recording starts and flashes when recording pauses.
QPress the
~
or
~
button adjust the pause
V sound level.
The VCVA level can be set to any of 15 different values.
The higher the value, the more sensitive the recorder to
sounds. At the highest value, even the faintest sound
will activate recording.
The VCVA pause sound level can be adjusted according
to the ambient (background) noise.
@
Level
meter
(varies
according
to
the
sound
volume
being
recorded)
®
Start
level
(moves to the right/left according to the set level)
• The start/stop actuation level also varies depending
on
the selected microphone sensitivity mode
(1lW
P.19).
• If the starting level is not adjusted within 2 seconds, the display will return to the previous.
• If the surrounding noise is loud, the starting sensitivity of the VCVA can be adjusted according to the
recording situation.
• To
ensure
successful
recordings,
prior
testing
and
adjustment
of
the
start/stop
actuation
level is
recommended.
17
To Next Page
Loading...
