Power Supply
When
the
recorder
is
not
being
used, turn
the
power
off
to
reduce
battery
consumption to a minimum. Even if the power is turned off, existing data, mode
settings, and clock settings will be maintained.
Turning On the Power
Slide the
HOLD
switch
in
the direction opposite
that indicated
by the arrow.
The
display will turn on and the
power
will be turned on.
The
resume function will bring the recorder back to the
stop position in memory before
power
was turned off.
Hold
Slide the
HOLD
switch
in
the direction indicated by
the arrow while the recorder
is not
in
operation.
The
display
shuts
off
and
the
power
will be turned off.
The resume function remembers the stop position before
the
power
is turned off.
Turning Off the Power
--
Standby Mode and Display Shut Off
-----....
If the recorder is stopped/not used for
over
5 minutes
after it is turned on, it goes into standby (power-save)
mode, and the display shuts off.
To
exit standby mode
and turn on the display, press any button.
9
To Next Page
Loading...
Need help?
General
Weight and Dimensions
