Olympus WS-331M - Page 37

Hold
$
}
$
~
r.
,
i
~
Set the Recorder to HOLD Mode
Hold
.:;:
f:
~ 1
j;
4
*
m
"
Slide the HOLD switch in
the direction indicated by ~ 1
""" Ii
the arrow while the recorder "",
is not in operation. ,t''' :
After "Hold" appears on the
display, the recorder is set to
HOLD mode.
If you bring the HOLD switch to the HOLD position, the
current conditions will be preserved, and all buttons and
switches will be disabled.This feature
is useful when the
recorder has to be carried
in a bag or pocket.
Exit HOLD Mode
Slide the HOLD switch in the direction
opposite that indicated
by the arrow.
• If you press any button in HOLD mode, the clock display flashes for 2 seconds, but it will not operate the
recorder.
• If HOLD is applied during playback (recording), operation is disabled with the playback (recording) state
unchanged. (When playback ends, or recording ends due to insufficient memory, the recorder will stop
once, then will automatically enter in hold status.)
37