To Next PageTo Next PageWhy Olympus WS-811 won't start?
Your Olympus Voice Recorder might not start because the battery is low, the power is off, or it's in HOLD mode. To resolve this, try charging or replacing the battery, turning the power on, or releasing the recorder from HOLD.
What to do if Olympus WS-811 doesn't record?
If your Olympus Voice Recorder is unable to record, it might be due to low remaining memory, reaching the maximum number of files, or incorrect settings. Try erasing unnecessary files, changing to another folder, or, if you are using WS-813, ensure that [Output] in the [FM Radio] settings is set to [Earphone].
How to fix Olympus WS-811 when nothing appears on the display?
If nothing appears on the display of your Olympus Voice Recorder, it could be due to the battery not being loaded properly, low battery power, or the power being off. Verify that the battery polarities are correct, charge or replace the battery, or turn the power on.
How to fix Olympus Voice Recorder when no playback sound is heard?
If you can't hear any playback sound on your Olympus Voice Recorder, check if earphones are connected and unplug them to use the built-in speaker. Also, ensure that [Speaker] is set to [On] and adjust the volume level if it is set to [00].
Why Olympus WS-811 Voice Recorder recording level is too low?
If the recording level on your Olympus Voice Recorder is too low, it might be because the microphone sensitivity is set too low or the output level for connected external devices is too low. Try setting [Rec Level] to [High] or [Middle] and adjusting the output level for the connected devices.
How to fix Olympus WS-811 when recording level is too high?
If the recording level on your Olympus Voice Recorder is too high, especially on the WS-813 model, try adjusting the recording level. If the issue persists, adjust the output level for any connected external devices.
How to fix Olympus WS-811 when voice files are not recorded in stereo?
If your Olympus Voice Recorder isn't recording voice files in stereo, it could be due to a monaural external microphone being connected, [Rec Mode] being set to a monaural recording mode, or, if you are using WS-813, [Zoom Mic] being set to the + side. Try using a stereo microphone, setting [Rec Mode] to the stereo recording mode, or setting [Zoom Mic] to [Off].
How to find recorded voice file on Olympus WS-811 Voice Recorder?
If you cannot find the recorded voice file on your Olympus Voice Recorder, you may be in the wrong folder. Switch to the correct folder to locate your file.
Why is there noise during Olympus Voice Recorder playback?
Noise during playback on your Olympus Voice Recorder could be due to the recorder being shaken during recording or being placed near a cell phone or fluorescent lamp. Try to avoid shaking the recorder during recording and move it away from electronic devices or fluorescent lamps.
Why Olympus WS-811 silent portions are not skipped during playback?
If silent portions are not being skipped during playback on your Olympus Voice Recorder (WS-813, WS-812 only), it may be because the [Voice Detect] process has not been performed or [Voice Playback] is set to [Off]. Try extracting voice portions using [Voice Detect] or setting [Voice Playback] to [On].
General| Recording Format | WMA |
|---|---|
| Storage Capacity | 4 GB |
| Microphone | Built-in stereo microphone |
| Internal Memory | 4 GB |
| Display Type | LCD |
| PC Interface | USB |
| Battery | 2 x AAA batteries |
| Playback Features | fast forward, rewind |
| Connectivity | USB |
