To Next PageTo Next PageWhat to do if my Olympus Voice Recorder is not recording?
If your Olympus Voice Recorder isn't recording, it could be due to a few reasons. You might have run out of memory, so try erasing any unnecessary files. Alternatively, you may have reached the maximum number of recordable files, in which case you should select another folder. Finally, ensure that [Earphone] is selected for [Output], not [Speaker].
How to fix inaudible playback on my Olympus Voice Recorder?
If the playback on your Olympus Voice Recorder is inaudible, consider these solutions: If earphones are connected, disconnect them to output the playback through the built-in speaker. Ensure that [On] is selected for [Speaker]. Also, check the volume level and adjust it if it's set to [00].
Why is the recording too quiet on my Olympus WS-822?
If your Olympus Voice Recorder's recording is too quiet, it might be due to a low recording level being set. Redo the recording after setting the recording level to [High] or [Middle]. Also, if using an external device, its output level may be too low, so adjust that accordingly. Finally, redo recording after adjusting the recording level.
Why is the display blank on my Olympus Voice Recorder?
A blank display on your Olympus Voice Recorder can occur for several reasons: the battery may not be inserted correctly (ensure the positive and negative terminals are properly aligned), the remaining battery power might be low (replace or charge the battery), or the power is simply turned off (turn the power on).
What to do if the audio file sound is distorted on Olympus WS-822 Voice Recorder?
If the audio file sound is distorted on your Olympus Voice Recorder, it could be because the recording level hasn’t been adjusted. Redo the recording after adjusting the recording level. If the problem persists, the voice recorder’s recording level or the output level of the connected external device may be too high; adjust the output level of the external device.
General| Brand | Olympus |
|---|---|
| Model | WS-822 |
| Category | Voice Recorder |
| Language | English |
Initial configuration for first use, including battery insertion and settings.
Powering the device via USB connection to a PC or AC adapter.
Managing power sources and expandable storage options.
HOLD mode, power off procedures, and Home screen navigation.
Understanding storage structure and selecting files.
Identification of physical components of the voice recorder.
Explanation of screen elements and indicators in various modes.
Steps to start and stop audio recordings.
Monitoring, microphone directivity, and recording scene settings.
How to play audio files on the device.
Enhancing audio quality and selecting playback styles.
Fast-forward, rewind, and skipping functions.
Marking specific points in audio files for easy access.
Locating files by their recording date.
Removing individual files or all files in a folder.
Deleting entire folders from the device's storage.
Antenna requirements and reception tips for FM radio.
Tuning, saving, and selecting FM channels.
Capturing audio broadcasts from the FM radio.
Managing files like sorting, copying, and locking.
Adjusting recording sensitivity, modes, and directivity.
Customizing playback experience and audio enhancement options.
Managing media, battery, USB connection, and formatting.
Configuring FM radio specific options like output and scan level.
System compatibility for connecting the recorder to a PC.
USB connection procedures for PC interaction.
Transferring data between PC and recorder.
Resolving device issues through error messages and guidance.
Important warnings and guidelines for safe operation.
Technical details and performance characteristics of the device.
