1
13
EN
Charging the battery
Charging the battery
Charging the battery by connecting to an AC adapter with a USB connection
(model A514; optional)
WS-833 and WS-832 models
only
NOTE
• Before connecting the AC adapter,
select [AC Adapter] for the USB
connection setting (☞ P.89).
• Before connecting the AC adapter,
release HOLD mode (☞ P.19).
1
Connect the voice recorder to
the USB connector on the AC
adapter.
To USB connector
of AC adapter
(model A514)
2
Connect the AC adapter to an AC
power outlet.
To an AC power
outlet
3
Press the `
OK
button to start
charging.
• When [Battery] (☞P.77) is set to
[Ni-MH], [Press OK to start charging]
appears on the display. Press the `OK
button while this message is blinking.
To Next Page
Loading...
