Need help?Do you have a question about the OMA 526BLV and is the answer not in the manual?
Operations for packing, lifting, handling, transporting, and unpacking must be performed by experienced personnel.
Guidelines for storing packs in covered areas and precautions for stacking them safely.
Instructions for safely opening packs and disposing of packing materials.
Important information for workshop personnel regarding safety and lift operation.
The manual is an integral part of the lift and must always be kept with it.
Details on the fixed structure, including posts, safety rods, and cables.
Components of the movable structure, including cross-pieces and platforms.
Technical specifications including lifting capacity, height, and clearance dimensions.
Maximum dimensions and weights of vehicles suitable for lifting.
Detailed specifications for the motor, pump, and lifting cables.
Essential safety rules, warnings, and forbidden uses of the lift.
Potential risks and safety devices during the lifting phase.
Risks to personnel and vehicles, including crushing, impact, and falling hazards.
Risks related to slipping, electric shock, lighting, component failure, and improper use.
Checks for suitability of the location, dimensions, and safety clearances.
Guidelines for adequate lighting and floor preparation for installation.
Steps for marking the floor and preparing it for column placement.
Instructions for assembling the movable structure, including platforms and cross-pieces.
Steps for assembling the columns, control post, and hydraulic unit.
Procedures for connecting the hydraulic system and electrical wiring.
Adjusting lifting cables and securing posts to the ground.
Instructions for fitting vehicle ramps and wheel stops.
Inspection of pulleys, alignment, bolts, moving parts, and protections.
Verification of electrical connections, earth connection, and hydraulic system.
Checking the motor's rotation direction against the pump's indicator.
Operations performed exclusively by technicians for initial setup and checks.
Description of controls like main switch, lift, lowering, and stop buttons.
Step-by-step instructions for lifting, stopping, and lowering operations.
Ensuring longevity and good condition of platforms through regular care.
Requirements for expert personnel and safety precautions during maintenance.
Warnings regarding electric shock and avoiding work on moving parts.
Recommendations for using original parts, following intervals, and performing checks.
Tasks to be performed monthly, including hydraulic unit and circuit checks.
Tasks to be performed every three months, covering bolts, cables, and safety systems.
Tasks for every six months, focusing on oil status and general inspection.
Tasks for every twelve months, including electrical system and hydraulic oil replacement.
A guide to identifying common problems and their corresponding solutions.
Procedures for disposing of used oil and scrapping the machine.
Information on obtaining spare parts and the procedure for ordering them.
General| Brand | OMA |
|---|---|
| Model | 526BLV |
| Category | Lifting Systems |
| Language | English |
To Next Page
