Omega CN4000 Series - INSTRUMENT INSTALLATION AND WIRING; Wiring Graph for 1;4 DIN and 1;8 DIN; Wiring Graph for 1;16 DIN

INSTRUMENT INSTALLATION AND WIRING
Wiring graph for instruments with dimension 1/4 DIN; 1/8 DIN Vertical and Horizontal
Note: The compensation
wires for different kinds of
thermocouple are different,
and should be directly connect
to the terminals. Connecting
the common wire between the
compensation wire and the
terminals will cause
measurement error.
Wiring graph for 1/16 DIN dimension instruments：
8