Need help?Do you have a question about the Omega CND3 Series and is the answer not in the manual?
General| Operating Temperature | 0 to 50°C (32 to 122°F) |
|---|---|
| Mounting | Panel Mount |
| Input Type | Thermocouple, RTD |
| Output Type | Relay, SSR Drive |
| Control Mode | PID |
| Display | Dual 4-digit LED |
| Power Supply | 100 to 240 VAC |
| Dimensions | 1/4 DIN |
| Control Algorithm | PID |
Key features and benefits of the CND3 series temperature controller.
Diagram of the system and explanation of display, LEDs, and buttons.
Details on product codes and available configurations for ordering.
Switching between Operation, Regulation, and Initial Setting modes.
Settings available within the controller's operation mode.
Creating and editing custom temperature control programs and patterns.
Utilizing external signals for dynamic control and adjustments.
Step-by-step instructions for the initial setup of the controller.
Configuring temperature sensor types and current input methods.
Setting display units, decimal places, and digital filters for input signals.
Defining upper and lower limits for temperature and current input values.
Adjusting analog output values with compensation for accuracy.
Configuring retransmission signals and managing their compensation.
Enabling or disabling cold junction compensation for thermocouple inputs.
Selecting and configuring heating, cooling, and alarm output control.
Setting Set Value (SV) using Fixed, Slope, or Program modes.
Detailed setup for PID control, including parameter selection and auto-tuning.
Using manual control to force fixed output values for specific operations.
Configuring Fuzzy control parameters and deadband for enhanced system response.
Managing multiple PID sets and performing auto/self-tuning for optimal performance.
How to define the minimum and maximum output control range.
Using current transformers (CTs) for current measurement and alarm functions.
Setting up external event inputs for control functions.
Adjusting upper and lower limits for temperature sensor application ranges.
Customizing the functionality of the F1 and F2 function keys.
Customizing and editing the controller's menu screens.
Restoring factory settings and implementing key lock functions for security.
Details on setting up RS-485 communication, protocols, and data registers.
Specifics on ASCII communication mode and data transmission formats.
Specifics on RTU communication mode and data transmission formats.
Specifications for panel cutouts and physical mounting procedures.
Electrical connection diagrams for DC and AC models and wiring precautions.
To Next Page
