Omega OAL-100 - Residual Hazards; Recommended Tools; Standard Torque Ranges

OMEGA AUTOMATICS 2020 v3.0.2 8
❖ Hand pinch point and crushing hazards of door closing edges!
❖ Crushing hazards at door closing edges!
4.3 Residual hazard
❖ After installation, hazards such as minor crushing, impact with limited force, and risk to unsupervised children
may exist depending on structural design of door area, type of door, and any safeguards that have been
implemented.
❖ Hand pinch point and crushing hazards at arm and track!
5. Recommended tools
1- 1/8 Allen key
2- 1/4 Allen key
3- 3/16 Allen key
4- 5/64 Allen key
5- 0.3 mm Flat screwdriver
6- 9/16 Wrench
7- Ph3 Screwdriver
8- Drill/ Drill bits
9- Torque wrench
10- Appropriate screws for application
11- Pressure gauge (0-35 lbf)
Fig 5.1
6. Standard torque ranges
Fastener size
ft lb
M5- #10
3.7
M6- 1/4
7
M8- 5/16
17
M10- 3/8
34
M12- 1/2
58