6
SAFETY INSTRUCTIONS Cont.
Maintenance and cleaning
- Do not use a steam cleaner.
- For any cleaning operation inside the oven cavity, the oven must be switched off.
- Before unclipping the glass, allow the appliance to cool.
- Before removing the back, ensure that the appliance is powered down. After cleaning, the back should be
replaced in accordance.
- Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven glass door since they can
scratch the surface, which may result in shattering of the glass.
- To clean both the electronic programmer window and the oven door, use a soft cloth.
- Do not use cleaning products, abrasive creams, or scouring sponges.
Warning :
- Make sure the appliance is disconnected from the power before replacing the lamp in order to avoid the risk
of electric shock.
- Change the lamp only when the appliance has cooled down. To unscrew the view port and the light, use a
rubber glove, which will make disassembly easier.
Warning :
- Installation should only be performed by qualified installers and technicians.
Warning :
If the electrical supply is restricted, means of all-pole disconnection must be accessible and incorporated in
the fixed wiring in accordance with the wiring rules.
If the power cable is damaged, it should be replaced by the manufacturer, its after-sales service department
or by a similarly qualified person in order to avoid danger.
PACKAGING
- This appliance’s packing materials are recyclable. Recycle them by depositing them in local
authority containers provided for this purpose.
- Your appliance also contains many recyclable materials. It is therefore marked with this logo to
indicate that used appliances must not be mixed with other waste.
To Next Page
Loading...
