12
INSTRUCTIONS FOR USE Cont.
Alarm Timer
You can set this timer to sound a buzzer after 0 to 60 minutes of cooking. First turn the knob fully clockwise,
then turn it back to the desired alarm time
Setting the minute minder (Models: OO656X, OO657X)
When the symbol is displayed, turn the knob left/right in order to set the timer value. The standard value is 30
minutes, it’s possible to modify it in the range between 0 and 60 minutes.
This timer has no influence on the oven activities and can be set also when the oven is off. The time of day is
displayed with priority in any case, the symbol shows the minute minder is active.
When the time expires, the symbol flashes and the buzzer sounds a warning sequence (two short beeps
repeated every 3 seconds) to recall the user attention. Push the knob to stop it. The buzzer stops in any case
after a time-out.
Setting an oven function manually
Turn the mode knob into the desired position, the clock display shows On for a few seconds. The oven will
work for a maximum time (12hours). Depending on the oven model, the number and type of available
functions can be different.
If the selected function works using any heating elements, the symbol is displayed (it doesn’t appear in light
and defrost position).
Turn the Temp & Time selector and set the desired oven temperature.
The control offers a PRESET temperature per every cooking mode or a full range between MIN and MAX to
be adjusted by hand. Check the value on the display after having selected the temperature.
The temperature appears on the clock display for about 5 seconds when the Time & Temp selector is pushed
or when a new function has just been selected.
As soon as the oven starts, the preheat led (indicated by the bars) on the left side of the clock display starts
flashing and becomes steadily on when the preheat ends.
Turn the mode selector to ZERO (OFF) position to stop any activity, the display will show OFF for a few
seconds.
Setting an automatic oven function
After having selected a function as described before, the control can be programmed in order to set timed
cooking activities. The time program remains active even if the function is changed .The following possibilities
are available:
1. Timed cooking setting the cooking time (duration).
2. Timed cooking setting the end of cooking time (stop time).
3. Delayed cooking setting duration and stop time. Push the knob in order to toggle between cooking duration
(cook time) and end of cooking time (stop time): the words “dur” or “End” are displayed respectively. Turn the
knob left/right to edit the duration or the stop time when the proper word is displayed.
To Next Page
Loading...
