Omicron CMC 850 User Manual

17
Setup and Operation
6.2 Configuring network settings and accessing Web Interface via
Ethernet
1. Locate the CMC 850 test set in OMICRON Device Link
2. Associate the CMC 850 test set with your computer.
a) In the device list, right-click the CMC 850 entry to open a device-related menu.
b) Click Associate device and follow the on-screen instructions.
3. Access the embedded functions via the Web Interface
CMC 850’s embedded functions are accessible via its Web Interface. Any common Web browser
can be used to access CMC 850 and to make use of the embedded functions.
Alternative method to invoking the Web browser by the procedures described above:
a) Start a Web browser of your choice on your computer.
b) Enter CMC 850’s IP address (in a format like http://172.22.23.61) into the Web browser’s
address bar.
c) Hit the <Return> key.
6.3 Using a CMIRIG-B interface unit
To use the OMICRON-supplied CMIRIG-B interface unit as reference for the time synchronization of
the IEC 61850 bus system, connect the CMIRIG-B’s front side connector “CMC” to the CMC 850‘s
“external Interface” connector.

Omicron CMC 850 Specifications

General

Brand	Omicron
Model	CMC 850
Category	Power distribution unit
Language	English