Omni OMNI-624 User Manual

OMNI-624/OMNI-624EU Installation and Setup Guide
6-24
QUESTION 15 SOUND OPTIONS
L1 L2 L3 L4
This question defines sounder and bell options. Enter the digits as follows:
Q 15, L1 – Enter the L1 digit from the table below.
L1
Entry
Fob/Key
Ding
Arm Bell
Ding
Disarm
Ding
Fast
Ding
0
2
✔
3
✔✔
4
✔
5
✔✔
6
✔✔
7
✔✔✔
8
✔
A
✔✔
B
✔✔ ✔
C
✔✔
D
✔✔✔
E
✔✔✔
F
✔✔✔✔
Fob/Keyswitch Ding:
If selected, arming from an
RF keyfob or a wired keyswitch will cause the
alarm sounder to ding twice; disarming dings once,
provided that arm/disarm bell ding options (see
below) are selected.
Arm Bell Ding:
If selected, the alarm sounder will
ding twice upon arming.
Disarm Ding:
If selected, the alarm sounder will
ding once upon disarming.
Fast Ding:
If selected, the arming dings will be
shorter tones.
Q 15, L2
– Enter the L2 digit from the table below.
L2
Entry
Threshold
Sounder
Threshold
Bell
CS Test
Ringback
Invert Bell
Output
0
1
✔
2
✔
3
✔✔
4
✔
5
✔✔
6
✔✔
7
✔✔✔
8
✔
9
✔✔
A
✔✔
B
✔✔ ✔
C
✔✔
D
✔✔✔
E
✔✔✔
F
✔✔✔✔
Threshold Sounder:
Alerts the user to the
end of exit time by sounding 4 rapid beeps
30, 20, 10, and 5 seconds before exit time
expires. When exit time expires, the keypad
will sound an acknowledgement tone.
Threshold Bell:
Similar to threshold
sounder option, except the alarm sounder
will sound 1 second at 30, 20, 10, and 5
seconds before the end of exit time.
CS Test Ringback:
If selected, keypads
will beep after the central station has
received the system test code.
Inverted Bell Output:
If selected, the
alarm sounder output signal is inverted.
This is useful when using self-activating
alarm sounders.

Omni OMNI-624 Specifications

General

Brand	Omni
Model	OMNI-624
Category	Security System
Language	English