OmniPrint OM7212S - Appendix A: Connectors

43 44
APPENDIX A: CONNECTORS
SERIAL INTERFACE CONNECTOR (OM7212S)
PRINTER
RJ - 12
1
2
3
4
5
6
GND
TXD(O)
RXD(I)
RTS(O)
DSR(I)
DTR(O)
(WHT)
(BLK)
(RED)
(GRN)
(YEL)
(BLU)
FEMALE
1
2
3
4
5
6
7
8
9
RXD(I)
TXD(O)
DTR(O)
GND
DSR(I)
RTS(O)
CTS(I)
(BLK)
(RED)
(YEL)
(WHT)
(BLU)
(GRN)
GS r n
[Name]
[Format]
[Range]
[Description]
Transmit status.
ASCII
Hex
Decimal
n = 1, 2, 49, 50
Transmits the status specified by n as follows.
GS
1D
29
r
72
114
n
n
n
GS w n
[Name]
[Format]
[Range]
[Description]
Set bar code width.
ASCII
Hex
Decimal
2
<
n
<
6
Set the horizontal size of the bar code.
n specifies the bar code width as follows.
Mulit-level bar codes are as follows :
UPC-A, UPC-E, JAn13(ENA13), JAN8(EAN8), CODE93, CODE128.
Binary-level bar codes are as follows.
CODE39, ITF, CODABAR
GS
1D
29
w
77
119
n
n
n
1, 49
2, 50
n
Transmits paper sensor status.
Transmits drawer kick-out connector status.
Function
2
3
4
5
6
n
0.282
0.423
0.564
0.706
0.847
0.282
0.423
0.564
0.706
0.847
0.706
1.129
1.411
1.834
2.258
Module width for
multi-level bar code
Thin element width (mm)
Binary-level bar code
Thick element width (mm)