23
Main circuit
400V class
Note 1. The wire diameter described in the above table shows the design value of the HIV line (heat-resistant 75 °C) standard.
2. When connecting wires to the main circuit terminal block, use the Round crimp terminal (UL compliant product) suitable for the
wire used.
Crimp terminals should be crimped using the Crimping tool recommended by the crimping terminal manufacturer.
Model
3G3RX2
Rated
settings
Power line
AWG (mm
2
)
R, S, T, U, V, W, P,
PD, N
Ground line
AWG (mm
2
)
Braking resis-
tor AWG
between
P and RB (mm
2
)
Screw size
of power
line terminal
Crimping terminal
power line/ground
line
Tightening
torque N·m
A4007
ND
14 (2.1) 14 (2.1) 14 (2.1) M4 2-4/2-4 1.4LD
VLD
A4015
ND
14 (2.1) 14 (2.1) 14 (2.1) M4 2-4/2-4 1.4LD
VLD
A4022
ND
14 (2.1) 14 (2.1) 14 (2.1) M4 2-4/2-4 1.4LD
VLD
A4037
ND
14 (2.1) 14 (2.1) 14 (2.1)
M4
2-4/2-4
1.4LD
VLD 12 (3.3) 12 (3.3) 12 (3.3) 5.5-4/5.5-4
A4055
ND
12 (3.3) 12 (3.3) 12 (3.3)
M5 5.5-5/5.5-5 3.0LD
VLD 10 (5.3) 10 (5.3) 10 (5.3)
A4075
ND
10 (5.3) 10 (5.3) 10 (5.3)
M5
5.5-5/5.5-5
3.0LD
VLD 8 (8.4) 8 (8.4) 8 (8.4) 8-5/8-5
A4110
ND
8 (8.4) 8 (8.4) 8 (8.4) M6 8-6/8-6 4.0LD
VLD
A4150
ND
8 (8.4) 8 (8.4) 8 (8.4) M6 8-6/8-6 4.0LD
VLD
A4185
ND 8 (8.4)
8 (8.4)
8 (8.4)
M6
8-6/8-6
4.0LD
6 (13.3) 6 (13.3) 14-6/8-6
VLD
A4220
ND 6 (13.3)
8 (8.4)
6 (13.3)
M6
14-6/8-6
4.0LD
4 (21.2) 4 (21.2) 22-6/8-6
VLD
A4300
ND 3 (26.7)
6 (13.3) --- M8
38-8/14-8
6.0LD 2 (33.6)
VLD 1 (42.4) 60-8/14-8
A4370
ND
1 (42.4) 6 (13.3) --- M8 60-8/14-8 15.0LD
VLD
A4450
ND 1 (42.4)
6 (13.3) --- M8
60-8/14-8
6.0 to 10.0LD 1/0 (53.5)
VLD 2/0 (67.4) 70-8/14-8
A4550
ND 2/0 (67.4)
4 (21.2) --- M8
70-8/22-8
6.0 to 10.0LD
1/0×2 (53.5×2) 60-8/22-8
VLD
B4750
ND
1/0×2 (53.5×2) 4 (21.2) --- M10 60-10/22-8 6.0 to 10.0LD
VLD
B4900
ND
1/
0
×2 (53.5×2)
3 (26.7) --- M10
60-10/38-8
6.0 to 10.0LD
VLD 2/0×2 (67.4×2) 70-10/38-8
B411K
ND
2/0×2 (67.4×2)
2 (33.6) --- M10
70-10/38-8
19.6LD
VLD 3/0×2 (85.0×2) 80-10/38-8
B413K
ND 3/0×2 (85.0×2)
2 (33.6) --- M10
80-10/38-8
19.6LD 4/0×2 (107×2) 100-10/38-8
VLD 250kc×2 (127×2) 150-10/38-8
To Next Page
Loading...
Need help?
General