Need help?Do you have a question about the Omron SYSDRIVE 3G3FV and is the answer not in the manual?
General| Series | SYSDRIVE 3G3FV |
|---|---|
| Control Method | V/f Control, Sensorless Vector Control |
| Frequency Range | 0.1 to 400 Hz |
| Type | Inverter |
| Output Voltage | 0 to Input Voltage |
| Power Range | 0.4 to 11 kW |
| Horsepower Range | 0.5HP to 75HP |
| Communication Options | RS-485 |
| Protection Functions | Overcurrent, Overvoltage |
Describes inverter capabilities and operator interface.
Outlines essential cautions and warnings for electrical wiring procedures.
Lists critical safety precautions and warnings related to inverter wiring procedures.
Explains how to use the Digital Operator's keys, display, and indicators for inverter operation.
Allows setting and reading parameters required for inverter operation, categorized into groups.
Outlines the sequential steps for installing, wiring, connecting power, and performing initial checks.
Explains basic settings required for operating and stopping the inverter.
Covers setting the parameter access level and selecting the inverter's control mode.
Lists parameters for setting language, access level, control method, and initialization.
Lists all parameters available in Program mode, categorized by group and function.
Explains fault detection mechanisms and processing for various fault displays.
Details fault displays, meanings, probable causes, and remedies for inverter faults.
Provides guidance for resolving common issues like parameter setting errors or motor operation problems.
Outlines reasons for motor failure to operate, such as incorrect operation method or low frequency reference.
Provides general specifications for 200-V and 400-V class inverters, including capacity, current, and voltage ratings.
To Next Page