Need help?Do you have a question about the Omron SYSDRIVE 3G3MV SERIES and is the answer not in the manual?
General| Model | SYSDRIVE 3G3MV SERIES |
|---|---|
| Category | Inverter |
| Input Frequency | 50/60 Hz |
| Output Frequency | 0.1 to 400 Hz |
| Cooling Method | Forced Air Cooling |
| Input Voltage | 200 to 240 VAC, 380 to 480 VAC |
| Horsepower Range | 0.1 to 15 HP |
| Power Range | 0.1 to 11 kW |
| Overload Capacity | 150% for 60 seconds |
| Braking Unit | Built-in |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overheat |
| Communication | RS-485 |
| Ambient Temperature | -10 to 50°C |
| Storage Temperature | -20 to 65°C |
| Humidity | 5 to 95% RH (non-condensing) |
| Vibration | 5.9 m/s² or less |
| Voltage Class | 200V, 400V |
Adhere to specific precautions for installing the inverter correctly to ensure safety and prevent malfunctions.
Observe essential precautions for wiring the inverter, including power supply, grounding, and emergency stop circuits.
Follow safety guidelines during operation, such as covering components and avoiding wet hands.
Take precautions during maintenance and inspection, such as powering off and waiting for discharge.
Explains how to copy and verify parameter settings using the inverter's EEPROM for efficient setup.
Outlines the step-by-step procedure for performing a test run of the inverter and motor.
Covers essential initial settings required to operate the inverter, including parameter write-prohibit and control mode selection.
Covers advanced settings for precise vector control, including motor constants and torque adjustments.
Explains PID control, its applications, operation types, block diagrams, and parameter settings for precise control.
Explains the inverter's fault detection (fatal errors) and warning detection (nonfatal errors) capabilities.
Provides guidance on identifying and resolving common operational issues and motor-related problems.
To Next Page