9-7
9-2 Option Specifications
9-2-1 List of Options
H Mounted Options
Name Model Description
DeviceNet
Communications Unit
3G3MV-PDRT2 Required when controlling the Inverter from
DeviceNet.
Remote I/O functions and message functions can be
used to suit the application.
Fan Unit
3G3IV-PFANj
Replacement for the existing cooling fan of the
Inverter.
Replace the cooling fan if it has reached the end of its
service life or a warning of cooling fan failure (FAN) is
indicated.
H Separately Mounted Option
Name Model Description
Scaling Meter K3MA-J Connected to the multi-function analog output of the
Inverter.
The Scaling Meter displays the rpm or speed of the
machine or line in actual units.
H Dedicated Options
Name Model Description
Braking Resistor
3G3IV-PERFj
Uses a resistor to absorb regenerative energy of the
motor to reduce deceleration time.
(Usage rate: 3% ED.)
Braking Resistor Unit
3G3IV-PLKEBj
Uses a resistor to absorb regenerative energy of the
motor to reduce deceleration time.
(Usage rate: 10% ED.)
DC Reactor
3G3HV-PUZDABj
Suppresses harmonic current generated from the
Inverter and improves the power factor of the Inverter.
DIN Track Mounting
Bracket
3G3IV-PEZZ08122j
An adapter making it possible to easily mount the
Inverter to DIN tracks.
Digital Operator
3G3IV-PJVOP146 A Digital Operator with a casing, but no FREQUENCY
adjuster. It can be used for remote control or when the
inverter panel needs to be located on the front of the
control panel.
3G3IV-PJVOP140 A Digital Operator with a FREQUENCY adjuster, but
no casing. It can be used for remote control or when
the inverter panel needs to be located on the front of
the control panel.
Casing 3G3IV-PEZZ08386A Casing for a Digital Operator (for the
3G3IV-PJVOP140 only).
Digital Operator Cable
3G3IV-PCNj26
The cable to connect an Inverter to the Digital
Operator casing for remote control.
Specifications
Chapter 9
To Next Page
Loading...
Need help?
General
