Omron SYSDRIVE 3G3MV SERIES User Manual

9-9
9-2-2 DeviceNet Communications Unit
H 3G3MV-PDRT2
This Communications Unit is required for Inverter control by DeviceNet. The following smart slave func-
tions can be used when a DeviceNet Unit is mounted to the Inverter. These functions reduce wiring re-
quirements, enable advanced diagnosis and prevention of equipment failure, and allow monitoring with
a PT or Configurator.
Refer to the User’s Manual for the DeviceNet Communications Unit for details.
• Warning torque detection
• Current tracing
• Average power monitoring
• Accumulated operating time monitoring
• Contact operation count monitoring
• Communication time monitoring
H External Dimensions (mm)
68
128
3
38
10.3
Specifications
Chapter 9

Omron SYSDRIVE 3G3MV SERIES Specifications

General

Model	SYSDRIVE 3G3MV SERIES
Category	Inverter
Input Frequency	50/60 Hz
Output Frequency	0.1 to 400 Hz
Cooling Method	Forced Air Cooling
Input Voltage	200 to 240 VAC, 380 to 480 VAC
Horsepower Range	0.1 to 15 HP
Power Range	0.1 to 11 kW
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication	RS-485
Ambient Temperature	-10 to 50°C
Storage Temperature	-20 to 65°C
Humidity	5 to 95% RH (non-condensing)
Vibration	5.9 m/s² or less
Voltage Class	200V, 400V