Omron 61F-GP-N - Three-phase Four-line Circuit Connections; 61 F-GP-N 220;240 VAC Wiring

61F-GP-N@
8
■ Connection with Three-phase Four-line Circuit
When supplying power from N-phase to the Controller in three-phase four-line circuit, refer to the following diagrams.
Line voltage (R-S, S-T, or R-T): 380 or 415 VAC
Phase voltage (N-R, N-S, or N-T): 220 or 240 VAC
61F-GP-N@ 220 or 240 VAC
Note: 1. The diagram shows the connections for the water supply. When draining, change the connection from terminal 1 to terminal 11.
2. Be sure to ground terminal 4.
Power source
380 or 415 VAC
R S T N *
M
Water
tank
Stop
Start
E2
E3
E1
P
Electromagnetic switch
A
*
Water supply source
Source voltage:
between 3 and 9
61F-GP-N
0 V
220 or
240 V
8 V
24 V
Control circuit
U
U
78 65
21
1110
U
4
3
9
(See note 1)
(See note 2.)