5
EN
1. Know Your Unit
2. Inserting and Replacing the Batteries
1. Open the battery cover on the back of
the main unit.
1)
Press the tab of the battery cover to
release it.
2) Pull it up as shown.
2. Install the batteries in correct polarity
as marked inside the battery
compartment.
3. Close the battery cover.
Grip Electrodes
Display Unit Holder
SET Button
Down/MEMORY Button
Up/GUEST Button
Resting Metabolism Button
BODY FAT/MUSCLE Button
WEIGHT/BMI Button
VISCERAL FAT Button
Foot Electrodes
Power Switch
Personal Profile
Number Button
Personal Profile
Number Button
Display
Cord
Display Unit
Main Unit (Measurement Platform)
Front View
Buttons
Tab
Battery Life and Replacement
When the battery low indicator ( ) appears,
replace all four batteries with new ones.
Items stored in memory are retained even if the
batteries are removed.
• Replace the batteries after turning off the power.
• Disposal of used batteries should be carried out
in accordance with the national regulations for
the disposal of batteries.
• Four AA batteries will last approximately 1 year
(when measurements are made four times a
day).
• Because the supplied batteries are for trial use
only, they may have a shorter life.
Operating instructions
To Next Page
Loading...
Need help?
General
