14
2. Preparation
2.1 Installing Batteries
Batteries are not included in this unit. You will need to supply your own 4 “AA”
batteries before using your monitor.
1. Remove the battery cover.
2. Insert 4 “AA” batteries as
indicated in the battery
compartment.
3. Close the battery cover.
• When the “ ” symbol flashes on the display, it is recommended that you
replace the batteries.
• To replace the batteries, turn your monitor off and remove all batteries. Then
replace with 4 new batteries at the same time.
• Replacing the batteries will not delete previous readings.
• The supplied batteries may have a shorter life than new batteries.
• Disposal of used batteries should be carried out in accordance with local
regulations.
To Next Page
