23
4.3 Disabling/Enabling Bluetooth
• After the pairing process is completed, this product always emits radio
frequencies (RF) in the 2.4 GHz band. DO NOT use this product in locations
where RF is restricted, such as on an aircraft or in hospitals. Disable the Bluetooth
feature in this monitor, or remove the batteries and unplug the AC adapter when in
RF restricted areas. For further information on potential restrictions refer to
documentation on the Bluetooth usage by the FCC.
Bluetooth is enabled as default.
1. When your monitor is off, press and hold the
button for more than 10 seconds.
“oFF” flashes 3 times.
2. Press the [START/STOP] button to turn your monitor off.
• To enable Bluetooth, press and hold the button for more than 2
seconds. “on” appears on the display.
• Your monitor automatically turns off 10 seconds after the completion.
• When Bluetooth is disabled, the “ ” symbol appears.
To Next Page
