Omron BP742N User Manual

GUIDANCE AND MANUFACTURER’S DECLARATION
Recommended separation distance between portable and mobile RF communications
equipment and the OMRON BP742N including AC-adapter
OMRON BP742N including AC-adapter is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The customer or the user of this OMRON BP742N
including AC-adapter can help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communications equipment (transmitters) and the
OMRON BP742N including AC-adapter as recommended below, according to the maximum
output power of the communications equipment.
Output Power of Transmitter
in Watt
Separation distance according to frequency of
transmitte
r in meter
150 kHz to 80
MHz
d = 1.2 P
80 MHz to 800 MHz
d = 1.2 P
800 MHz to 2.5GHz
d = 2.3
P
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
Note: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorpt
ion and reflection from structures, objects, and people.
37

Omron BP742N Specifications

General

Type	Automatic
Cuff size	23 - 43 cm
Product color	White
Memory function	Yes
Number of users	2 user(s)
Memory registers	100
Placement supported	Upper arm
Mean arterial pressure	No
Quantity per pack	1 pc(s)
Display type	Analog