Omron BP742N User Manual

GUIDANCE AND MANUFACTURER’S DECLARATION
33
OMRON Automatic Blood Pressure Monitor
Information for accompanying documents in the scope of IEC60601-1-2:2007
Model: BP742N including AC-adapter
Important information regarding Electro Magnetic Compatibility (EMC)
With the increased number of electronic devices such as PC’s and mobile (cellular)
telephones, medical devices in use may be susceptible to electromagnetic interference
from other devices. Electromagnetic interference may result in incorrect operation of the
medical device and create a potentially unsafe situation. Medical devices should also not
interfere with other devices.
In order to regulate the requirements for EMC (Electro Magnetic Compatibility) with the
a
im to prevent unsafe product situations, the IEC60601-1-2 standard has been
implemented. This standard defines the levels of immunity to electromagnetic
interferences as well as maximum levels of electromagnetic emissions for medical
devices.
Medical devices manufactured by OMRON Healthcare conform to this IEC60601-1-2:2007
st
andard for both immunity and emissions.
Nevertheless, special precautions need to be observed:
• The use of accessories and cables other t
han those specified by OMRON, with the
exception of cables sold by OMRON as replacement parts for internal components, may
result in increased emission or decreased immunity of the device.
• The medical devices should not be used adjacent
to or stacked with other equipment.
In case adjacent or stacked use is necessary
, the medical device should be observed to
verify normal operation in the configuration in which it will be used.
• Refer to further guidance below regarding the EMC environment in which the device
shoul
d be used.
• The MEDICAL ELECTRICAL EQUIPMENT BP742N including AC-adapter needs
special pre
cautions regarding EMC and needs to be installed and put into service
according to the EMC information provided in this documentations.
• The Essential Performance of the BP742N includ
ing AC-adapter is to measure a blood
pressure and a pulse rate and using the memory function.
The BP742N including AC-adapter may be interfered with by other equipment, even if that
o
ther equipment complies with CISPR EMISSION requirements.

Omron BP742N Specifications

General

Type	Automatic
Cuff size	23 - 43 cm
Product color	White
Memory function	Yes
Number of users	2 user(s)
Memory registers	100
Placement supported	Upper arm
Mean arterial pressure	No
Quantity per pack	1 pc(s)
Display type	Analog