PREPARATION
13
Battery Installation
1. Remove the battery cover.
2. Insert 4 “AA” batteries as
indicated in the battery
compartment.
3. Replace the battery cover.
Notes:
• When the low battery symbol (
) appears on the display, turn the monitor
off, then replace all batteries at the same
time. Long life alkaline batteries
are recommended.
• The measurement values continue to be stored
in me
mory even after the
batteries are replaced.
• The supplied batteries may have a shorter life.
• Dispose of the device, components and option
al accessories
according to
applicable local regulations. Unlawful disposal may cause environmental
pollution.
To Next Page
Loading...
