11
2. Preparation
EN
2.4
Setting the Date and Time
The date and time will be automatically set when paired with your smartphone. To set
manually, follow the instructions below.
1. Press the connection button repeatedly until the
year flashes on the Date/Time display.
Note: The number of times depends on TruRead
TM
Mode and if the device is paired with a smartphone.
2. Push or button to change the year.
Push button to confirm the year and then the month flashes. Repeat the same
steps to change the month, day, hour, and minute.
3. Press the START/STOP button to turn the monitor off.
Open the rear cover page to read the following:
The letter identifiers on the rear cover page correspond to those in the body of this page.
C
Change Confirm
Change Confirm
Change Confirm
Change Confirm
Change Confirm
: Forward : Back
Year
Month
Day
Hour
Minute
To Next Page
Loading...
