Need help?Do you have a question about the Omron CIMR-J7AZ - QUICK and is the answer not in the manual?
General| Model | CIMR-J7AZ - QUICK |
|---|---|
| Input Frequency | 50/60 Hz |
| Enclosure Rating | IP20 |
| Type | Inverter |
| Input Voltage | 200-240V AC |
| Output Voltage | 3-phase 200 to 240 VAC |
| Output Frequency | 0-400Hz |
| Rated Output Current | Varies depending on the specific model within the series |
| Overload Capacity | 150% for 60 seconds |
| Cooling Method | Fan cooled |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit |
| Operating Temperature | -10°C to +50°C |
| Altitude | Up to 1000m above sea level |
| Vibration | 5.9 m/s2 at 10 to 55 Hz |
Defines WARNING and CAUTION symbols and their implications for safety.
Lists specific safety precautions required for UL and cUL certifications.
Instructions for checking the product upon receipt and verifying parts.
Information on using Japanese or French warning display stickers.
Guidelines and precautions for physically mounting the inverter unit.
Schedule and checks for regular inspection to ensure reliability.
Guidelines for replacing internal parts like fans and capacitors.
Steps for connecting the inverter's wiring as part of the quick start.
Details on connecting control circuit terminals for quick setup.
Procedures and considerations for installing the inverter quickly.
Guidance for initial power-up and testing during quick start.
Essential parameters for initial configuration in quick start.
How to monitor inverter status and parameters quickly.
Information on troubleshooting faults and alarms during quick start.
To Next Page