Need help?Do you have a question about the Omron V7 and is the answer not in the manual?
General| Series | V7 |
|---|---|
| Cooling Method | Forced air cooling |
| Power Rating | 0.4kW to 15kW |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit |
| Output Voltage | 3-phase 200 to 240 VAC, 3-phase 380 to 480 VAC |
Covers autotuning functions and precise stop positioning capabilities for easier setup.
Highlights inverter's ability to provide accurate motor control without feedback sensors.
Details communication options like Fieldbus, PLC, and motion bus, plus software tools.
Enables customised control solutions using application software, saving on hardware costs.
Allows drive control decentralisation in ruggedized IP65 housing, reducing cabinet costs.
Integrates PLC capabilities and high-speed motion bus for advanced control systems.
Describes pocket-size design, sensorless vector performance, and IP65 variants.
Covers software customisation for applications and system configuration details.
Details electrical ratings, output characteristics, and input power for 200V class inverters.
Details electrical ratings, output characteristics, and input power for 400V class inverters.
Outlines control methods, frequency range, binary inputs/outputs, and protection functions.
Details operating temperature, humidity, storage, installation, and degree of protection.
Describes the physical layout, display, and indicator lights of the digital operator.
Explains the operation of keys for mode selection, increment, decrement, and execution.
Provides detailed physical dimensions for IP20 inverters from 0.1 to 4 kW.
Provides detailed physical dimensions for IP20/NEMA1 inverters from 5.5 to 7.5 kW.
Details physical dimensions for IP65 inverters ranging from 0.55 to 4 kW.
Provides physical dimensions for IP65 inverters with option frame accessory attached.
Illustrates standard wiring for power supply, control signals, and outputs.
Provides specific notes on wiring, shielded cables, and power supply requirements.
Details functions for AC power input, inverter output, and braking resistor connections.
Lists signals for digital inputs, analog inputs/outputs, and communication interfaces.
Presents heat loss values (Fin, Inside unit, Total) for various inverter models.
Specifies minimum installation clearances for proper cooling of IP65 inverters.
Lists available accessories like cables, option units, and line filters for system configuration.
Provides a guide to select inverter models based on voltage, phase, and power rating.
Details specifications for V7 IP65 inverters, including power ratings and models.
Lists compatible line filters for V7 IP65 inverters, including rated current and weight.
Describes option cards for DeviceNet, PROFIBUS-DP, CANopen, and MECHATROLINK-II communication.
Details PLC option cards for enhanced functionality and option frames for IP65 models.
Lists accessories for digital operators, including extension cables and blank covers.
Details available software for inverter configuration, monitoring, and programming.
Provides specifications for inverter-mounted braking units including resistance and torque.
Details specifications for separately installed braking resistor units and their compatibility.
To Next Page
