Need help?Do you have a question about the Omron MX2 and is the answer not in the manual?
General| Model | MX2 |
|---|---|
| Category | Inverter |
| Enclosure Rating | IP20 |
| Control Method | V/f control, Sensorless vector control |
| Frequency Range | 0.1 to 400 Hz |
| Protection | Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit |
| Communication | Modbus RTU |
| Ambient Temperature | -10 to 50 °C (without freezing or condensation) |
| Overload Capacity | 150% for 60 seconds |
| Cooling Method | Fan Cooled |
| Humidity | 5 to 95% RH (without condensation) |
| Altitude | Up to 1000m without derating |
| Voltage | 200-240 VAC, 380-480 VAC |
| Braking Unit | Built-in (for certain models), Optional External |
Outlines OMRON's one-year warranty against defects in materials and workmanship.
Provides a detailed, step-by-step guide for installing the inverter, including precautions.
Guides the user through the initial powerup test to verify correct wiring and general compatibility.
Explains the layout and function of the inverter's keypad for programming and monitoring.
Details configuration for logic (discrete) and analog outputs and inputs.
Details parameters for configuring motor characteristics and performing auto-tuning for optimal performance.
Lists critical caution messages that must be read before operating the inverter.
Explains how to interface the inverter with external devices like PLCs for control.
Explains the Gate Suppress function for safe stop according to EN60204-1.
Provides safety messages, general precautions, inspection items, and troubleshooting tips for common issues.
Guides users on resetting inverter parameters to their original factory default values.
Provides guidelines for installing the inverter to meet EMC directive requirements in the EU.
To Next Page
