Omron MX2 User Manual

217
Using Intelligent Output Terminals Section 4-6
4-6-22 Logic Output Function
The inverter has a built-in logic output feature. Select any two operands out of
all intelligent output options except LOG1~LOG3 and their operator out of
AND, OR, or XOR (exclusive OR). The terminal symbol for the new output is
[LOG]. Use
C021, C022 or C026 to route the logical result to terminal [11], [12] or
the relay terminals.
Option
Code
Terminal
Symbol
Function
Name
State Description
33
34
35
LOG1
LOG2
LOG3
Logic
Output
Function
ON when the Boolean operation
specified by C144 /C145/C147
has a logical "1" result
OFF when the Boolean operation
specified by C144 /C145/C147 has a
logical "0" result
Valid for inputs: 11, 12, AL0 - AL2
Required settings: C141~C150
Intelligent outputs used as
internal inputs:
RUN, FA1, FA2… or
all other output
signals
Operand A
RUN, FA1, FA2… or
all other output
signals
Operand B
Operator
AND, OR, XOR
[LOG1]/[LOG2]/[LOG3]
(C144/C147/C150)
C142/C145/C148
C143/C146/C149
Input
Status
[LOG] Output
State
A B AND OR XOR
00000
01011
10011
11110

Omron MX2 Specifications

General

Model	MX2
Category	Inverter
Enclosure Rating	IP20
Control Method	V/f control, Sensorless vector control
Frequency Range	0.1 to 400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit
Communication	Modbus RTU
Ambient Temperature	-10 to 50 °C (without freezing or condensation)
Overload Capacity	150% for 60 seconds
Cooling Method	Fan Cooled
Humidity	5 to 95% RH (without condensation)
Altitude	Up to 1000m without derating
Voltage	200-240 VAC, 380-480 VAC
Braking Unit	Built-in (for certain models), Optional External