Omron MX2 User Manual

253
Warranty Section 6-5
6-5 Warranty
6-5-1 Warranty Terms
The warranty period under normal installation and handling conditions is two
(2) years from the date of manufacture, or one (1) year from the date of instal-
lation, whichever occurs first. The warranty shall cover the repair or replace-
ment, at Omron's sole discretion, of ONLY the inverter that was installed.
1. Service in the following cases, even within the warranty period, shall be
charged to the purchaser:
a) Malfunction or damage caused by mis-operation or modification or im-
proper repair
b) Malfunction or damage caused by a drop after purchase and transpor-
tation
c) Malfunction or damage caused by fire, earthquake, flood, lightening,
abnormal input voltage, contamination, or other natural disasters
2. When service is required for the product at your work site, all expenses as-
sociated with field repair shall be charged to the purchaser.
3. Always keep this manual handy; please do not lose it. Please contact your
Omron distributor to purchase replacement or additional manuals.

Omron MX2 Specifications

General

Model	MX2
Category	Inverter
Enclosure Rating	IP20
Control Method	V/f control, Sensorless vector control
Frequency Range	0.1 to 400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit
Communication	Modbus RTU
Ambient Temperature	-10 to 50 °C (without freezing or condensation)
Overload Capacity	150% for 60 seconds
Cooling Method	Fan Cooled
Humidity	5 to 95% RH (without condensation)
Altitude	Up to 1000m without derating
Voltage	200-240 VAC, 380-480 VAC
Braking Unit	Built-in (for certain models), Optional External