Need help?Do you have a question about the Omron 3G3JX and is the answer not in the manual?
General| Model | 3G3JX |
|---|---|
| Category | Inverter |
| Control Method | V/f control |
| Input Frequency | 50/60 Hz |
| Communication Interface | RS-485 (optional) |
| Operating Temperature | -10 to 50°C |
| Humidity | 20 to 90% RH (non-condensing) |
| Enclosure Rating | IP20 |
| Input Voltage | 200 to 240 V AC |
| Output Voltage | Three-phase 200 to 240 V AC |
| Output Frequency | 400 Hz |
| Protection | Overcurrent, Overvoltage, Undervoltage, Overheat |
| Communication | RS-485 |
| Braking Unit | Built-in |
| Power Range | 0.1 to 15 kW |
| Cooling Method | Fan-cooled |
| Storage Temperature | -20°C to +65°C |
| Altitude | Up to 1000 m |
Outlines OMRON's warranty terms and limitations of liability for the product, covering defects and usage responsibilities.
Explains safety warnings, cautions, and alert symbols used in the manual to ensure safe product usage.
Step-by-step guide for performing the initial test run of the inverter, including power-on and parameter settings.
Details the process of operating the inverter during the test run phase, covering checkpoints and status checks.
Comprehensive list of all configurable parameters, their monitor ranges, default settings, and units.
Explains how to view real-time operational data and status of the inverter, including frequency, current, and voltage.
Details various operational modes and parameter settings for the inverter's functions like frequency and acceleration.
Lists and explains various error codes and special displays shown by the inverter for quick diagnosis.
Provides solutions for common problems and issues encountered with the inverter, covering motor and data issues.
To Next Page
