Omron MX2 User Manual

2
Introduction Section 1-1
1-1-2 Inverter Specification Label
The Omron MX2 inverters have product labels located on the right side of the
housing, as pictured below. Be sure to verify that the specifications on the
labels match your power source, and application safety requirements.
The model number for a specific inverter contains useful information about its
operating characteristics. Refer to the model number legend below:
MX2 series
A: Standard specs
MX2AB002-E
Voltage:
B: Single-phase 200 VAC
2: Three-phase 200 VAC
4: Three-phase 400 VAC
Max. applicable motor output
001: 0,1 kW
~
150: 15,0 kW
E: Europe standard

Omron MX2 Specifications

General

Model	MX2
Category	Inverter
Enclosure Rating	IP20
Control Method	V/f control, Sensorless vector control
Frequency Range	0.1 to 400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit
Communication	Modbus RTU
Ambient Temperature	-10 to 50 °C (without freezing or condensation)
Overload Capacity	150% for 60 seconds
Cooling Method	Fan Cooled
Humidity	5 to 95% RH (without condensation)
Altitude	Up to 1000m without derating
Voltage	200-240 VAC, 380-480 VAC
Braking Unit	Built-in (for certain models), Optional External