Omron CK3E Series - Page 46

46
Right-click NX-ECC203 in the
Multiview Explorer, and select
Coupler Connection (USB)
then Online.
After you have confirmed the
destination of the USB
connection, click the OK button.
4
Double-click NX-ECC203 in the
Multiview Explorer to open the
NX-ECC203 edit page.
Right-click in the NX-ECC203
tab page and select Compare
and Merge with Actual Unit
Configuration from the menu.
5
Click Apply Actual Unit
Configuration to apply the
actual unit configuration.
When the setting is complete,
click OK.