40
8. Other Settings on the Monitor
8.1
Disabling/Enabling Bluetooth
Bluetooth is enabled as default.
1. When your monitor is off, press and hold the
button on the monitor for more than
10 seconds.
“oFF” appears on the BP reading display.
2. Press the BP [START/STOP] button to turn
your monitor off.
Note
• When Bluetooth is disabled, the “ ” symbol appears.
• To enable Bluetooth, press and hold the button for more than 2 seconds.
“on” appears on the BP reading display.
• Your monitor will automatically turn off within 2 minutes after completion.
Warning
• This product emits radio frequencies (RF) in the 2.4 GHz band. DO NOT use this product in locations where RF is restricted, such as on
an aircraft or in hospitals. Turn off the Bluetooth feature in this monitor and remove batteries when in RF restricted areas. For further
information on potential restrictions refer to documentation on the Bluetooth usage by the FCC.
To Next Page
Loading...
