43
9. Error Messages and Troubleshooting
appears
The arm cuff was inflated exceeding the
maximum allowable pressure.
Do not touch the arm cuff and/or bend the air tube while taking a
measurement. If inflating the arm cuff manually, refer to section 7.
appears
You move or talk during a measurement.
Vibrations disrupt a measurement.
Remain still and do not talk during a measurement.
appears
The pulse rate is not detected correctly.
Apply the arm cuff correctly, then take another measurement.
Refer to sub-section 3.1.
Remain still and sit correctly during a measurement.
appears
does not flash during
a measurement.
appears
The monitor has malfunctioned.
Press the BP [START/STOP] button again. If “Er” still appears,
contact customer service.
Refer to section 14.
BP reading display /
Problem
Possible Cause Solution
To Next Page
Loading...
